HM122 PORTABLE SAWMILL

HM122 PORTABLE SAWMILL

Woodland Mills has designed the HM122 sawmill for budget minded customers looking at getting into milling their own lumber at an exceptional price point. Based on our very popular HM126 model, the HM122 offers hobby sawyers an easy to use, well engineered sawmill with the ability to mill logs up to 22” (55cm) in diameter and 10’ 4” (3.1m) in length. The HM122 also supports an unlimited ability to extend your track to handle milling logs of any length.

$2,199.00

Qty
Build & Price

Flat Rate Shipping
$299.00

2 Year Warranty

Same Price Policy

Product Information

HM122 Specifications

Woodland Mills designed the HM122 sawmill for budget minded customers looking at getting into milling their own lumber at an exceptional price point. Based on our very popular HM126 model, the HM122 offers hobby sawyers an economical and well engineered mill. Featuring a powder coated structure and a 7.0 HP Kohler gas/petrol engine, this mill is a good choice for hobby sawyers.

HM122 Portable Sawmill HM122 Specifications

Cutting

The mill is capable of cutting 22″ (55cm) diameter logs up to 10’ 4” (3.1m) long. Extra track sections are available in 6’ 5” (1.95m) increments. Capable of squaring cants at 16″ (40cm) or live edge boards at 18″ (45cm) wide. It can also skim veneers at as thin as 1/16″ (1.6mm). The HM122 will cut within 1″ (25mm) of the deck ensuring that you maximize your usable board foot output.

HM122 Portable Sawmill Cutting

Power

Our mills are powered by a 7.0 HP 4-cycle Kohler gas/petrol engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty. Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.

HM122 Portable Sawmill Power

Track System

The head of our sawmill rolls along rigid 2.5″ x 2.5″ (6cm x 6cm) “L” channel which is cross supported with heavy duty 2 3/8″ x 4 3/4″ (6cm x 12cm) rectangle log bunks. These heavy duty cross supports also provide additional rigidity to the track system. The track also features one easy to use adjustable log clamp to securely hold the log while milling. The track itself consists of two 6’ 5” (1.95m) sections allowing for 10’ 5” (3.1m) log lengths. Additional 6’ 5” (1.95m) tracks may be attached to accommodate logs of any length.

HM122 Portable Sawmill Track System

General Construction

All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn hand crank system. The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.

HM122 Portable Sawmill General Construction

Blades

The HM122 utilizes 1.25″ x 125″ x 0.042″ (32mm x 3.175m x 1.0mm) Lenox Woodmaster hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.

HM122 Portable Sawmill Blades

Warranty

The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.


Technical Specifications

Power

7.0HP Kohler Pro Command Gas/Petrol

Log Diameter Capacity

22" (55cm)

Log Length Capacity

10\\'4" (3.15m)

Additional Track Extensions

6\\'5" (1.95m) (Multiple extensions can be added on)

Distance Between Blade Guides

18" (45cm)

Maximum Cut Depth

6" (15cm)

Last Cut Off Deck

1" (2.5cm)

Maximum Cut Width

16" (40cm) Square Cant or 18" (45cm) Live Edge

Last Cut Off Deck

1" (2.5cm)

Track Rail Construction

2.5" x 2.5" (63mm x 63mm) Galvanized Steel Rails

Track Log Bunks (Rectangle Tube Steel)

2.375" x 4.75" (60mm x 120mm) Powder Coated

Log Clamps

2 Screw Style

Head Design

2 Post with Back Cross Support

Bandwheel Diameter

16" (40cm)

Blade Size

Lenox 1.25" Width x 125" Length x 7/8" Pitch (32mm x 3175mm x 22mm)

Blade Engagement System

Centrifugal Clutch (Gas & Go)

Lubricant Tank

0.8 Gallon / 3 Litre Plastic

Finish

Powder Coat Paint / Galvanized Steel

Sawmill Warranty

2 Year Parts Warranty

Engine Warranty

3 Year Warranty (Offered directly through Kohler)

Shipping Weight

679 lbs (308 kg)

Shipping

Most orders can be shipped to your home or business address with curbside delivery. Stocked items are shipped from a warehouse close to you within 2 to 11 business days*. Tailgate service on a transport truck provided to most areas. Once your order is shipped, a tracking number will be provided for a more accurate delivery time.

Shipping Weight: 679 lbs (308 kg)

Approximate Delivery Times

* Some residential deliveries may require additional days of service. Remote locations and regions are excluded from flat rate shipping. If you are identified in a remote postal code, our sales staff will contact you to review additional shipping costs. Remote areas include but are not limited to Alaska, Hawaii, Puerto Rico, Yukon Territories, Northwest Territories, Nunavut.

Manual

Accessories

Reviews


JOIN OUR NEWSLETTER!