Products - Parts - Woodland Mills

HM122 & 722 Sawmill Blades

MSRP:

Was:

Now: $115.00 - $420.00

Choose Options
HM126 & HM130 Sawmill Blades

MSRP:

Was:

Now: $240.00 - $660.00

Choose Options
HM130MAX Sawmill Blades

MSRP:

Was:

Now: $260.00 - $720.00

Choose Options
WG24 Stump Grinder Carbide Teeth Set

MSRP:

Was:

Now: $102.00 - $270.00

Choose Options
HM136MAX™ Maintenance Kit

MSRP:

Was:

Now: $169.00

Add to Cart
HM136MAX™ Belt Kit

MSRP:

Was:

Now: $59.00

Add to Cart
TF810 PRO Maintenance Kit

MSRP:

Was:

Now: $469.00

Add to Cart
TF810 PRO Belt Kit

MSRP:

Was:

Now: $49.00

Add to Cart
TF810 PRO Bed Plate Kit

MSRP:

Was:

Now: $59.00

Add to Cart
TF810 PRO Chipper Blade Kit

MSRP:

Was:

Now: $399.00

Add to Cart
Series 5 PTO Shaft with Slip Clutch (Trimmable)

MSRP:

Was:

Now: $289.00

Add to Cart
Series 4 PTO Shaft with Shear Pin (Trimmable)

MSRP:

Was:

Now: $149.00

Add to Cart
Centrifugal Clutch Assembly (14 HP)

MSRP:

Was:

Now: $90.00

Add to Cart
Centrifugal Clutch Assembly (9.5 HP)

MSRP:

Was:

Now: $80.00

Add to Cart
Centrifugal Clutch Assembly (7 HP)

MSRP:

Was:

Now: $75.00

Add to Cart
PRO CBN Grinding Disc

MSRP:

Was:

Now: $99.00

Add to Cart
WC88 Bed Plate Kit

MSRP:

Was:

Now: $49.00

Choose Options
WC88 Drive Belt Set

MSRP:

Was:

Now: $85.00

Add to Cart
WC88 Chipper Blade Set

MSRP:

Was:

Now: $159.00

Add to Cart
WC88 Maintenance Kit

MSRP:

Was:

Now: $269.00

Choose Options
WC68 Bed Plate Kit

MSRP:

Was:

Now: $49.00

Add to Cart
WC68 Hydraulic Pump Belt

MSRP:

Was:

Now: $15.00

Add to Cart
WC68 Chipper Blade Set

MSRP:

Was:

Now: $215.00

Add to Cart
WC68 Maintenance Kit

MSRP:

Was:

Now: $269.00

Add to Cart
WC46 Wood Chipper Blade Kit

MSRP:

Was:

Now: $189.00

Add to Cart
WC46 Hydraulic Pump Belt

MSRP:

Was:

Now: $15.00

Add to Cart
WC46 Wood Chipper Maintenance Kit

MSRP:

Was:

Now: $249.00

Add to Cart
HM126/HM130 & HM130MAX Bandwheel Belts

MSRP:

Was:

Now: $49.00

Choose Options
HM126 / HM130 / HM130MAX Sawmill Maintenance Kit

MSRP:

Was:

Now: $159.00

Choose Options
Bandwheel Bearings

MSRP:

Was:

Now: $62.00

Add to Cart
HM122 & 722 Bandwheel Belts

MSRP:

Was:

Now: $49.00

Choose Options
Blade Guide Bearings

MSRP:

Was:

Now: $22.00

Choose Options
HM122 & 722 Sawmill Maintenance Kit

MSRP:

Was:

Now: $149.00

Choose Options

HM122 & 722 Sawmill Blades

Sawmill blades for the HM122 and 722 sawmills. 7/8” Pitch, 10 Degree Hook Angle - Hard & Softwood 7/8” Pitch - 125″ x 1.25″ x 0.042″ x 7/8″ (3175mm x 32mm x 1mm x 22mm) blades for the HM122 and 722...

MSRP:

Was:

Now: $115.00 - $420.00

Choose Options
HM126 & HM130 Sawmill Blades

Sawmill blades for the HM126 and HM130 sawmills. Please Note: Not compatible with HM130MAX model. 7/8” Pitch, 10 Degree Hook Angle - Hard & Softwood 7/8” Pitch - 144″ x 1.25″ x 0.042″ x...

MSRP:

Was:

Now: $240.00 - $660.00

Choose Options
HM130MAX Sawmill Blades

Sawmill blades for the HM130MAX sawmill. Please Note: Not compatible with HM126/HM130 models. 7/8” Pitch, 10 Degree Angle - Hard & Softwood 7/8” Pitch - 157.5″ x 1.25″ x 0.042″ x 7/8″...

MSRP:

Was:

Now: $260.00 - $720.00

Choose Options
WG24 Stump Grinder Carbide Teeth Set

A set of 6 carbide-tipped cutting teeth for the WG24 Stump Grinder. These teeth can be sharpened.

MSRP:

Was:

Now: $102.00 - $270.00

Choose Options
HM136MAX™ Maintenance Kit

The sawmill maintenance kit includes a set of the most common wearing parts. Keep your HM136MAX™ sawmill up and running and minimize downtime. Save when you buy this kit versus the parts individually. Kit includes: 1 set of bandwheel bearings...

MSRP:

Was:

Now: $169.00

Add to Cart
HM136MAX™ Belt Kit

One (1) drive belt and one (1) follower belt (two belts) for the HM136MAX™ portable sawmill bandwheels. Set includes the drive belt which runs from the clutch on the engine to the bandwheel and the opposing belt on the other bandwheel. Belts should...

MSRP:

Was:

Now: $59.00

Add to Cart
TF810 PRO Maintenance Kit

The maintenance Kit includes all the major wearing parts needed to service the Woodland Mills TF810 PRO PTO Wood Chipper. These parts include the following: TF810 PRO Chipper Blade Set (8 blades total) TF810 PRO Drive Belt Kit (2...

MSRP:

Was:

Now: $469.00

Add to Cart
TF810 PRO Belt Kit

The Drive Belt Kit includes cogged “V” belts: Hydraulic Pump Belt: BX48 Paddle Flywheel Belt: BX50

MSRP:

Was:

Now: $49.00

Add to Cart
TF810 PRO Bed Plate Kit

The Bed Plate Kit includes: 1x hardened steel anvil plate 3x M10 bolts 3x Lock washers 3x M10 flat washers

MSRP:

Was:

Now: $59.00

Add to Cart
TF810 PRO Chipper Blade Kit

The Chipper Blade Set includes: 8x hardened steel reversible knives 24x M10 bolts

MSRP:

Was:

Now: $399.00

Add to Cart
Series 5 PTO Shaft with Slip Clutch (Trimmable)

The Series 5 PTO Shaft is compatible with gearboxes featuring a 1-3/8" Z6 input shaft. It is equipped with a 6-spline slip clutch, allowing controlled slippage to manage torque, and enabling different speeds on each side of the shaft. The PTO Shaft...

MSRP:

Was:

Now: $289.00

Add to Cart
Series 4 PTO Shaft with Shear Pin (Trimmable)

The Series 4 PTO Shaft is compatible with gearboxes featuring a 1-3/8" Z6 input shaft. It is equipped with a shear pin that protects the drive shaft from damage when subjected to excessive load. The PTO Shaft includes a quick-release splined yoke on the...

MSRP:

Was:

Now: $149.00

Add to Cart
Centrifugal Clutch Assembly (14 HP)

One (1) heavy duty centrifugal clutch assembly compatible with a 1-inch [25.4 mm] shaft and an 108 mm diameter pulley. For use on HM126, HM130 and HM130MAX sawmills equipped with a 14 HP engine.

MSRP:

Was:

Now: $90.00

Add to Cart
Centrifugal Clutch Assembly (9.5 HP)

One (1) centrifugal clutch assembly compatible with a 1-inch [25.4 mm] shaft and an 87 mm diameter pulley. For use on HM122 and HM126 sawmills equipped with a 9.5 HP engine.

MSRP:

Was:

Now: $80.00

Add to Cart
Centrifugal Clutch Assembly (7 HP)

One (1) centrifugal clutch assembly compatible with a ¾ inch [19.1 mm] shaft and an 80 mm diameter pulley. For use on the HM122 sawmill equipped with a 7 HP engine.

MSRP:

Was:

Now: $75.00

Add to Cart
PRO CBN Grinding Disc

The PRO CBN Grinding Disc lets you take your blade sharpening to the next level. With a significantly higher level of hardness than standard grinding discs, CBN (Carbon Boron Nitride) discs provide consistent profiling of sawmill blades due to the hard...

MSRP:

Was:

Now: $99.00

Add to Cart
WC88 Bed Plate Kit

The bed plate kit includes: 1 hardened steel anvil plate 3 M10 bolts 3 lock washers 3 M10 flat washers

MSRP:

Was:

Now: $49.00

Choose Options
WC88 Drive Belt Set

The drive belt kit includes 4 BX53 cogged “V” belts.

MSRP:

Was:

Now: $85.00

Add to Cart
WC88 Chipper Blade Set

The chipper blade set includes: 4x hardened steel reversible knives 8x M10 bolts 8x M10 locking nuts

MSRP:

Was:

Now: $159.00

Add to Cart
WC88 Maintenance Kit

The maintenance kit includes all the major wearing parts needed to service the Woodland Mills WC88 Wood Chipper. These parts include the following: WC88 Chipper Blade Set (4 blades total) WC88 Drive Belt Kit (4 Belts) WC88 Bed Plate Kit (1 Piece)

MSRP:

Was:

Now: $269.00

Choose Options
WC68 Bed Plate Kit

Kit includes: 1x hardened steel anvil plate 3x M10 bolts 3x lock washers 3x M10 flat washers

MSRP:

Was:

Now: $49.00

Add to Cart
WC68 Hydraulic Pump Belt

The hydraulic pump belt includes 1 AX41 cogged “V” belt.

MSRP:

Was:

Now: $15.00

Add to Cart
WC68 Chipper Blade Set

The chipper blade set includes: 4 hardened steel reversible knives 16 M10 bolts 6 M10 locking nuts

MSRP:

Was:

Now: $215.00

Add to Cart
WC68 Maintenance Kit

The maintenance kit includes all the major wearing parts needed to service the Woodland Mills WC68 Wood Chipper. These parts include the following: WC68 Chipper Blade Set (4 blades total) WC68 Hydraulic Pump Belt (1 Belt) WC68 Bed Plate Kit (1...

MSRP:

Was:

Now: $269.00

Add to Cart
WC46 Wood Chipper Blade Kit

Designed for the Woodland Mills WC46 Wood Chipper. The chipper blade kit includes: 4 hardened steel reversible knives 16 M10 bolts 16 M10 locking nuts

MSRP:

Was:

Now: $189.00

Add to Cart
WC46 Hydraulic Pump Belt

The hydraulic pump belt includes 1 AX40 cogged “V” belt.

MSRP:

Was:

Now: $15.00

Add to Cart
WC46 Wood Chipper Maintenance Kit

The maintenance kit includes all the major wearing parts needed to service the Woodland Mills WC46 Wood Chipper. Kit includes the following: WC46 Chipper Blade Set (4 blades total) WC46 Hydraulic Pump Belt (1 Belt) WC46 Bed Plate Kit (1 Piece)

MSRP:

Was:

Now: $249.00

Add to Cart
HM126/HM130 & HM130MAX Bandwheel Belts

One (1) drive belt and one (1) follower belt (two belts) for the HM126/HM130 & HM130MAX portable sawmill bandwheels. Set includes the drive belt which runs from the clutch on the engine to the bandwheel and the opposing belt on the other bandwheel...

MSRP:

Was:

Now: $49.00

Choose Options
HM126 / HM130 / HM130MAX Sawmill Maintenance Kit

The sawmill maintenance kit includes a set of the most common wearing parts. Keep your HM126/HM130 & HM130MAX sawmill up and running and minimize downtime. Save when you buy this kit versus the parts individually. Kit includes: 1 set of bandwheel...

MSRP:

Was:

Now: $159.00

Choose Options
Bandwheel Bearings

One set of bandwheel bearings (four bearings) to fit all sawmill models and years of Woodland Mills sawmills. There are two bearings per bandwheel (four total). Bearings should be replaced if they become dry internally and noisy during operation or...

MSRP:

Was:

Now: $62.00

Add to Cart
HM122 & 722 Bandwheel Belts

Kit contains two belts for the HM122 & 722 portable sawmill. Set includes the drive belt which runs from the clutch on the engine to the bandwheel and the opposing belt on the other bandwheel. Belts should be replaced when the existing belts are...

MSRP:

Was:

Now: $49.00

Choose Options
Blade Guide Bearings

Two sets of blade guide bearings (four bearings) to fit all sizes and model years of Woodland Mills sawmills. Bearings should be replaced if they become dry internally and noisy during operation. Worn bearings will also show signs of deep grooves in...

MSRP:

Was:

Now: $22.00

Choose Options
HM122 & 722 Sawmill Maintenance Kit

The HM122/722 sawmill maintenance kit includes a set of the most common wearing parts. Keep your HM122/722 sawmill up and running and minimize downtime. Kit includes: 1 set of bandwheel bearings (four bearings) 1 sets of blade guide bearings...

MSRP:

Was:

Now: $149.00

Choose Options