Product Description
The HM130 was designed for sawyers looking for more horsepower and bigger log capacity. Featuring a 14 HP Kohler gas/petrol engine, 30” (76cm) log diameter cutting capacity and a rigid 4 post head design. All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn hand crank system. The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.
Cutting
The mill is capable of cutting 30" (76cm) diameter logs up to 10’ 5” (3.1m) long. Additional track sections are available in 6’ 5” (1.95m) increments. Capable of squaring cants at 22" (56cm) or skimming veneers at as thin as 1/16" (2mm). The HM130 will cut within 1" (25mm) of the deck ensuring you maximize your usable board foot output.
Power
A reliable 14 HP 4 cycle Kohler gas powered electric start engine powers the HM130. Featuring a slant cylinder design with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4 stage air filtration systems ensures only clean air enters the engine for maximum power and life of the engine. The industrial centrifugal clutch offers easy gas-and-go operation. If you would like to utilize the electric start option on your sawmill, you will be required to purchase a 12V battery. The engine does not require the battery if you choose to use the recoil start option instead.
Track System
The head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentation. These cross supports are also covered with a stainless steel cap to prevent certain woods (such as oak) from being stained from contact with painted surfaces. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track itself consists of two 6’ 5” (1.95m) sections allowing for 10’ 5” (3.1m) log lengths. Additional 6’ 5” (1.95m) tracks may be attached to accommodate logs of any length.
Blades
The HM130 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.
Warranty
The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
Specification
Power
14HP Kohler Pro Command (Gas/Petrol)
Log Diameter Capacity
30" (76cm)
Log Length Capacity
10\\'5" (3.15m)
Additional Track Extensions
6\\'5" (1.95m) (Multiple extensions can be added on)
Distance Between Blade Guides (Adjustable Blade Guide)
13.5" - 22" (34cm - 56cm)
Maximum Cut Depth
7" (18cm)
Last Cut Off Deck
1" (2.5cm)
Maximum Cut Width
21" (53cm) Square Cant or 22" (55cm) Live Edge
Last Cut Off Deck
1" (2.5cm)
Track Rail Construction
2.5" x 4" (63mm x 100mm) Galvanized Steel Rails
Track Log Bunks (Rectangle Tube Steel)
3" x 6" (75mm x 150mm) Powder Coated
Stainless Steel Log Bunk Covers
Included
Leveling Feet
Set of 12 Included
Log Clamps
1 Quick Lock Style
Head Design
2"x3" (50mm x 75mm) 4 Post
Bandwheel Diameter
19" (48cm)
Blade Size
Lenox 1.25" Width x 144" Length x 7/8" Pitch (32mm x 3658mm x 22mm)
Blade Engagement System
Centrifugal Clutch (Gas & Go)
Lubricant Tank
3.4 Gallon / 13 Litre Aluminium
Finish
Powder Coat Paint / Galvanized Steel
Sawmill Warranty
2 Year Parts Warranty
Engine Warranty
3 Year Warranty (Offered directly through Kohler)
Shipping Weight
1000 lbs (454 kg)
HM130 Woodlander™
$5,498.00Add to Cart
HM130 Woodlander™ XL
$6,098.00Add to Cart
Lifting Tongs
$399.00Add to Cart
Woodlander™
$1,399.00Add to Cart
Woodlander™ XL
$1,799.00Add to Cart
Winch Post Kit
$179.00Add to Cart
Skidding Tongs
$169.00Add to Cart
Shipping Information
Most orders can be shipped to your home or business address with curbside delivery. Stocked items are shipped from a warehouse close to you within 2 to 11 business days*. Tailgate service on a transport truck provided to most areas. Once your order is shipped, a tracking number will be provided for a more accurate delivery time.
Shipping Weight: 1000 lbs (454 kg)
Approximate Delivery Times
* Some residential deliveries may require additional days of service. Remote locations and regions are excluded from flat rate shipping. If you are identified in a remote postal code, our sales staff will contact you to review additional shipping costs. Remote areas include but are not limited to Alaska, Hawaii, Puerto Rico, Yukon Territories, Northwest Territories, Nunavut.
