Essential
WC68
+1 part and accessory
- WC68 Maintenance Kit
- Chainsaw Holder
- Wood Chipper Tow Hitch
- Wood Chipper Cover
Standard
WC68
+2 parts and accessories
- WC68 Maintenance Kit
- Chainsaw Holder
- Wood Chipper Tow Hitch
- Wood Chipper Cover
Select
WC68
+3 parts and accessories
- WC68 Maintenance Kit
- Chainsaw Holder
- Wood Chipper Tow Hitch
- Wood Chipper Cover
Ultimate
WC68
+4 parts and accessories
- WC68 Maintenance Kit
- Chainsaw Holder
- Wood Chipper Tow Hitch
- Wood Chipper Cover
Product Features
CAPACITY
The WC68 operates on tractors with 20 to 50 HP at the PTO. It has a large 23” x 27” (58 cm x 69 cm) infeed hopper opening that tapers down to a 6” x 8” (15 cm x 20 cm) opening where the 8" (20 cm) diameter roller grabs the branches and feeds them through the chipper. Branches as small as ¼” (6 mm) diameter and as large as 6” (15 cm) diameter can be fed through the WC68. To chip full 6” (15 cm) diameter logs at full infeed speed, a tractor with over 40 HP at the PTO is required.
HYDRAULIC INFEED SYSTEM
Branches are pulled into the WC68 with the 8" (20 cm) diameter infeed roller. The roller is hydraulically driven by the chipper's self-contained hydraulic system, and the hydraulic pump is belt driven from the main flywheel shaft. The infeed roller is adjustable in direction and speed, making it easy to feed branches of all shapes and sizes. The roller down pressure may be adjusted via two large springs, ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
FLYWHEEL
The dynamically balanced 24” (61 cm) diameter, 3/4” (2 cm) thick solid steel flywheel runs on a 2” (5 cm) diameter shaft, supported by 2 industrial and greaseable flanged bearings. It features four CNC-machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 540 RPM.
FLYWHEEL LOCKING PIN
No more unsafe blade changes with the Woodland Mills flywheel locking pin. The WC68 features a flywheel locking pin that makes blade changes or flywheel maintenance convenient and safe. The pin simply fits into a series of holes that are positioned so every blade can be easily accessed while being changed or reversed.
REVERSIBLE CHIPPER BLADES
The WC68 chipper utilizes four high-quality hardened steel reversible chipper blades. These blades are 90 degrees apart, and can be reversed to take advantage of having two cutting edges on each blade. The blades are held onto the flywheel with four countersunk M10 bolts and locking nuts. Blades can be changed very quickly, thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
FOLDING INFEED CHUTE
The infeed chute on the WC68 wood chipper has a large 23” x 27” (58 cm x 69 cm) opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up to decrease the footprint of the chipper during transport or storage.
INFEED OPENING
The infeed chute on the WC68 wood chipper has a large 23” x 27” (58 cm x 69 cm) opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up to decrease the footprint of the chipper during transport or storage.
DISCHARGE CHUTE
The opening in the flywheel housing is 6” x 8” (15 cm x 20 cm), making it capable of accepting branches with several limbs. This reduces the need to trim branches down before feeding them into the chipper.
QUICK HITCH COMPATIBLE
The WC68 has a Category 1, 3-point hitch system that is designed to work with tractors rated at 20-50 PTO horsepower. It’s also quick hitch compatible, allowing for faster, easier hookups so you can get to work sooner.
PTO SHAFT INCLUDED
The PTO shaft, complete with shear pin, is included with the WC68 chipper.
ASSEMBLY
The WC68 chipper arrives in a steel crate and can be up and running in as little as one hour. The infeed chute and discharge chute are removed during shipping to eliminate the possibility of damage. The chipper will require 5 gallons (20L) of ISO 32 hydraulic oil in the tank, which is not included, but can be purchased at most farm or hardware stores. Lastly, attach the PTO shaft that comes included and trim it to length for your tractor, as per the manual if required.
Specifications
Drive System
Tractor PTO
Required PTO HP
20 - 50
Chipping Diameter
6" [15 cm] Branch Diameter
Flywheel System
Single Flywheel
In-feed Chute Opening
27" x 26” [69 cm x 66 cm]
In-feed Opening
6" x 8” [15 x 20 cm]
In-feed Chute
Quick folding for transport/storage
In-feed System
Self Contained Hydraulic System
In-feed Drive
Forward/Neutral/Reverse with Variable Speed: [0-75 ft-min] / [23 m/min]
In-feed Roller Size
8" [20 cm] Chisel Tooth
In-feed Roller Pressure
Adjustable via Spring Tension
Quick Hitch Compatible
Cat 1 Quick Hitch
Transport
Tractor 3 Point Hitch
Flywheel Speed
540 RPM
Flywheel Drive System
Direct Drive
Flywheel Diameter/Thickness
24” x 3/4” thick [61 cm x 2 cm thick]
Flywheel Housing System
Easy To Open Clamshell (for easy clean out and blade changes)
Flywheel Housing Thickness
5/16" [8 mm] Thick
Flywheel Shaft
2" [50 mm] Diameter
Hydraulic System
Yes - Standard NPT Fittings & Valves
Hydraulic Oil
19 L / 5 gallons of ISO 32 or ISO 46 (warmer climates)
Hydraulic Pump
Yes - Belt Driven
Discharge Chute
360 Degree Swivel
Chipper Base
Adjustable Laser Cut Plate Design
PTO Shaft
Shear Pin Protected PTO Shaft Included
Finish
Powder Coat Paint
Number of Blades
4 Reversible Blades
Product Weight
747 lb [340 kg]
Shipping Weight
825 lb [374 kg]
Manuals and Drawings
Shipping and Pick-up
Woodland Mills strives to make your shopping experience easy. We want to get your equipment to you as soon as possible. Once you place your order, you can trust that our customer service and delivery partners take care to ensure the best experience possible.
We offer Flat Rate Shipping for Free
Shipping Weight: 864 lb (393 kg)
Remote locations and regions are excluded from flat rate shipping. If you are in a remote rural area, our sales staff will contact you to review additional shipping costs.
Warranty
At Woodland Mills, we put our customers first. If you have any questions about a product you purchased, you can contact us at 1-855-476-6455. The WC68 is backed by the 3-year Woodland Mills warranty (excludes wearing parts and cosmetic damage).
Financing
Pay at your own pace with Affirm.
When inspiration strikes, Affirm helps you say yes without giving up financial control.
Select Affirm at checkout to pay over time—and never pay a penny more than you agree to on day one.