null

$250 OFF Orders Over $1,000 + Additional Savings on Select Products

HM122 & 722 6' 5" Standard Track Extension

$370
Sale

For a limited time, get $250 off orders over $1,000. Applied at checkout. Offer ends August 4, 2026.

This 6' 5" (1.95 m) track extension bolts directly to your existing HM122 & 722 track system, allowing you to mill longer logs without changing your overall setup. With one extension installed, your HM122 can mill logs up to 16' 11" (5.1 m) in length, and multiple extensions can be added on ground-mount setups to increase cut length even further.

The extension uses 1/4" thick precision-machined L-rail that matches the existing track, forming a match-set with the sawhead carriage wheels for smooth, consistent travel during milling. The rails are cross-supported with heavy-duty powder-coated rectangular steel log bunks, keeping the track rigid, square, and properly aligned while spreading log weight over a larger surface to help prevent log marking.

The kit also includes two log supports (short and long) for working with different log sizes and cut heights, along with an additional screw-style log clamp to secure material across the extended cutting length. Installation is straightforward—simply remove the last log bunk from your existing track, attach and square the extension, then reinstall the bunk at the end of the new section. It’s a simple way to expand your milling capacity as your projects grow.

$370

Please select product options to check availability

SKU:
0002091
Product Features

ADDS 6' 5" OF CUTTING LENGTH

Adds 6' 5" (1.95 m) of additional track, allowing the HM122 to mill logs up to 16' 11" (5.1 m) long with a single extension. Multiple extensions can be added to ground-mounted setups for even greater cutting capacity.

MATCHED L-RAIL TRACK SYSTEM

Built from the same 1/4" precision-machined L-rail as the original sawmill track. This creates a continuous running surface for the sawhead as it travels across the extension.

REINFORCED TRACK SUPPORT STRUCTURE

Heavy-duty rectangular steel log bunks support the extension and help maintain track alignment across the added length. The design distributes log weight across a larger footprint while supporting longer material.

ADDITIONAL LOG SUPPORTS AND CLAMP

Includes both short and long log supports, along with an additional screw-style log clamp. This provides extra support and holding capability across the extended cutting area.

BOLT-ON INSTALLATION

Installs by removing the end log bunk, attaching and squaring the extension, and reinstalling the bunk at the far end. No modification to the sawmill frame is required.

1879
!